English 
Clamp type pneumatic, hydraulic rotary chuck seat
Easy to use and convenient for installation; it can replace the spindle box and can meet the special occasions.
The end is equipped with synchronous pulley, which can have direct connection with the main power.
High rotation speed, keep long air source under rotation condition with the anti-lock shaft design
The limit speed of the following parameters is the value of the hydraulic form.
| Spec. | A | B | C | D | E | F | G | H | K | d | L1 | R |
| KJ130T-3 | 166 | 290 | 252 | 70 | 292 | 213 | 30-8M60T | 155 | 13.5 | 33 | 45 | 100 |
| KJ160T-3 | 168 | 315 | 285 | 96 | 325 | 245 | 30-8M70T | 165 | 18 | 45 | 38 | 130 |
| KJ200T-3 | 215 | 350 | 310 | 96 | 350 | 272 | 30-8M80T | 195 | 18 | 52 | 38 | 130 |
| KJ250T-3 | 254 | 365 | 335 | 131 | 375 | 302 | 43-8M96T | 195 | 18 | 75 | 35 | 171 |
| KJ320T-3 | 330 | 416 | 366 | 106 | 406 | 289 | 43-8M106T | 215 | 22 | 101 | 45 | 152 |
| KJ400T-3 | 420 | 530 | 510 | 120 | 555 | 428.5 | 43-8M148T | 270 | 22 | 140/160 | 45 | 198 |
| Spec. | Claw travel (Diameter) | Area of clamping cylinder cm² | Allowable pressure (Oil pressure) | Allowable pressure (Air pressure) | limit speed r/min | Clamping range | Tightening range | Weight kg |
| KJ130T-3 | 5 | 49 | 15kg/cm² | 8kg/cm² | 2500 | 5-130 | 20-140 | 68 |
| KJ160T-3 | 5 | 68 | 15kg/cm² | 8kg/cm² | 2500 | 5-170 | 20-180 | 115 |
| KJ200T-3 | 7.2 | 140 | 15kg/cm² | 8kg/cm² | 2000 | 5-200 | 25-220 | 139 |
| KJ250T-3 | 8.8 | 150 | 15kg/cm² | 8kg/cm² | 1600 | 10-260 | 30-260 | 165 |
| KJ320T-3 | 9.8 | 176 | 15kg/cm² | 8kg/cm² | 1200 | 20-310 | 50-330 | 219 |
| KJ400T-3 | 10.6 | 236 | 15kg/cm² | 8kg/cm² | 800 | 30-400 | 60-420 | 278 |
The above data are the standard parameters, personalized customized solutions can be provided according to customer's requirement.
Clamp type pneumatic, hydraulic rotary chuck seat
Easy to use and convenient for installation; it can replace the spindle box and can meet the special occasions.
The end is equipped with synchronous pulley, which can have direct connection with the main power.
High rotation speed, keep long air source under rotation condition with the anti-lock shaft design
The limit speed of the following parameters is the value of the hydraulic form.
| Spec. | A | B | C | D | E | F | G | H | K | d | L1 | R |
| KJ130T-3 | 166 | 290 | 252 | 70 | 292 | 213 | 30-8M60T | 155 | 13.5 | 33 | 45 | 100 |
| KJ160T-3 | 168 | 315 | 285 | 96 | 325 | 245 | 30-8M70T | 165 | 18 | 45 | 38 | 130 |
| KJ200T-3 | 215 | 350 | 310 | 96 | 350 | 272 | 30-8M80T | 195 | 18 | 52 | 38 | 130 |
| KJ250T-3 | 254 | 365 | 335 | 131 | 375 | 302 | 43-8M96T | 195 | 18 | 75 | 35 | 171 |
| KJ320T-3 | 330 | 416 | 366 | 106 | 406 | 289 | 43-8M106T | 215 | 22 | 101 | 45 | 152 |
| KJ400T-3 | 420 | 530 | 510 | 120 | 555 | 428.5 | 43-8M148T | 270 | 22 | 140/160 | 45 | 198 |
| Spec. | Claw travel (Diameter) | Area of clamping cylinder cm² | Allowable pressure (Oil pressure) | Allowable pressure (Air pressure) | limit speed r/min | Clamping range | Tightening range | Weight kg |
| KJ130T-3 | 5 | 49 | 15kg/cm² | 8kg/cm² | 2500 | 5-130 | 20-140 | 68 |
| KJ160T-3 | 5 | 68 | 15kg/cm² | 8kg/cm² | 2500 | 5-170 | 20-180 | 115 |
| KJ200T-3 | 7.2 | 140 | 15kg/cm² | 8kg/cm² | 2000 | 5-200 | 25-220 | 139 |
| KJ250T-3 | 8.8 | 150 | 15kg/cm² | 8kg/cm² | 1600 | 10-260 | 30-260 | 165 |
| KJ320T-3 | 9.8 | 176 | 15kg/cm² | 8kg/cm² | 1200 | 20-310 | 50-330 | 219 |
| KJ400T-3 | 10.6 | 236 | 15kg/cm² | 8kg/cm² | 800 | 30-400 | 60-420 | 278 |
The above data are the standard parameters, personalized customized solutions can be provided according to customer's requirement.
